One Down
February 25th, 2008
…. Well, it took a little longer than I expected, but I finished prepping the rear fender. Using an orbital sander, I took the paint off down to bare metal. Before spraying with a quick coat of primer, I used a bit of Metal-2-Metal body filler to fix a small dent and hide a couple small nicks I put in the metal while cutting the fender.
Next up is the front fender. Being plastic, cutting the fender itself should be rather straight forward. But I also want to lower the fender about a half inch, this will require cutting and re-welding the stiffening/mounting bracket.
Stay tuned….